Search data shows many buyers start with simple questions such as 100 mesh to micron, 200 mesh to micron, mesh to mm and mesh size to micron. These terms are useful for early selection, but they are not enough for a final purchase order.
For stainless steel woven wire mesh, mesh count means openings per linear inch. Micron and mm describe the opening size. The real aperture also depends on wire diameter and weave type, so the same mesh count can have slightly different openings.
Quick Conversion Table
| Search query | Common reference | Buyer note |
|---|---|---|
| 100 mesh to micron | About 149 micron / 0.149 mm | General water, oil and industrial filtration. |
| 200 mesh to micron | About 74 micron / 0.074 mm | Fine filtration, discs and support screens. |
| 400 mesh to micron | About 37 micron / 0.037 mm | High precision filtration; confirm wire diameter. |
How to Use the Values in an RFQ
When requesting a quote, send both the target micron and the actual application. For example: 316L stainless steel mesh, about 74 micron, roll width 1 meter, for chemical liquid filtration. This gives the factory enough context to recommend wire diameter, weave type and packing.
- Use the full mesh to micron conversion chart for more mesh counts.
- For products and factory quotation, see stainless steel filter mesh.
- For water applications, read the water treatment filter mesh guide.
FAQ
How many microns is 100 mesh?
100 mesh is commonly about 149 micron, equal to about 0.149 mm.
How many microns is 200 mesh?
200 mesh is commonly about 74 micron, equal to about 0.074 mm.
Is mesh to micron conversion exact?
No. It is a reference value. Wire diameter, weave type and open area change the real aperture of stainless steel woven mesh.
100 and 200 Mesh Conversion RFQ Notes for Serious Buyers
For filter mesh buying, the most useful supplier page should answer practical purchasing questions instead of only describing the product. Buyers comparing mesh to micron selection should confirm material grade, mesh count or micron rating, wire diameter, aperture tolerance, product size, order quantity, application environment and delivery country before asking for a quote.
ANPING MAOYE can review drawings, samples or photos when the buyer needs custom stainless steel filter mesh parts. For repeat orders, keeping one approved specification sheet helps reduce mistakes in diameter, width, edge treatment, packing labels and shipment preparation.
How This Helps Quote Accuracy
A complete RFQ allows the factory to check whether 304, 316 or 316L stainless steel is more suitable, whether the mesh should be supplied as rolls, sheets, discs, cylinders or replacement screens, and whether the order needs trial samples before bulk production.
| Buyer detail | What to provide | Why it matters |
|---|---|---|
| Material | 304, 316 or 316L stainless steel | Controls corrosion resistance, weldability and cost. |
| Filtration target | Mesh count, micron rating, aperture or sample | Helps match flow rate and particle retention. |
| Product form | Roll, sheet, disc, cylinder, basket or OEM drawing | Determines cutting, forming, welding and packing. |
| Order plan | Sample, small batch, repeat order or annual demand | Helps quote realistic lead time and export packing. |
For faster communication, send the full specification through the inquiry form and mention the working liquid, temperature, cleaning method and whether the part will be reused or replaced regularly.