When you need stainless steel mesh that fits exact specifications, off-the-shelf products rarely cut it. Whether you are sourcing filter discs for a water treatment plant, woven cylinders for hydraulic systems, or sintered panels for pharmaceutical applications, custom manufacturing is the only way to guarantee performance, fit and long-term value.
At ANPING MAOYE, we operate as a dedicated stainless steel mesh manufacturer and wire mesh OEM manufacturer based in Anping, Hebei — the heart of China’s wire-mesh industry. We supply custom stainless steel mesh, ODM designs and bulk stainless steel mesh orders directly from our filter mesh factory to engineering teams and distributors worldwide.
Why Choose Custom Manufacturing for Your Filter Mesh?
Standard mesh rolls are fine for basic screening, but industrial filtration demands precision. A mismatch in wire diameter, mesh count or open area can lead to premature clogging, pressure drop or product contamination. Custom manufacturing solves this by letting you define every parameter:
- Exact micron rating for your target particle size
- Specific alloy grade (304, 316, 316L) for chemical or thermal resistance
- Pre-formed shapes (discs, cylinders, cones, panels) to eliminate downstream fabrication
- Edge finishing, welding and framing ready for immediate installation
If you are unsure which material suits your environment, our guide on 304 vs 316 stainless steel mesh breaks down the corrosion, temperature and cost differences.
OEM & ODM Services We Provide
OEM (Original Equipment Manufacturing)
Under our OEM stainless steel mesh program, you supply the drawings, specifications or samples and we manufacture to your exact tolerances. Every order can include:
- Laser-cut filter discs with chamfered edges
- Seam-welded cylinders with end caps and connector threads
- Multi-layer sintered discs for high differential pressure
- Wire cloth panels with spot-welded support frames
All OEM parts carry your branding and are packed to your retail or warehouse requirements.
ODM (Original Design Manufacturing)
Not every buyer arrives with a full engineering package. Our ODM stainless steel mesh service starts with your application — fluid type, operating temperature, flow rate and pressure — and our team designs the optimal mesh structure. We use SolidWorks and AutoCAD for 3D modeling, then prototype and test before scaling to production.
This is especially useful for startups and R&D departments that need a custom mesh filter manufacturer capable of moving from concept to full production without multiple suppliers.
Custom MOQ & Price Breakdown by Product Type (2026)
The most common question we receive from B2B buyers is: “What is your MOQ for custom shapes?” The answer depends on the complexity of the product and the material grade. Below is a transparent pricing table based on actual 2026 production costs.
| Product Type | Standard MOQ | Price per Unit (100 pcs) | Price per Unit (500 pcs) | Price per Unit (1,000+ pcs) | Tooling Cost | Lead Time |
|---|---|---|---|---|---|---|
| Round filter disc (Ø 50–200 mm, 1–3 layers) | 100 pcs | $2.50–$5.00 | $1.80–$3.50 | $1.20–$2.50 | None | 7–10 days |
| Round filter disc (Ø 50–200 mm, sintered 3–5 layers) | 200 pcs | $8.00–$15.00 | $5.50–$10.00 | $4.00–$7.50 | $200–$400 | 10–15 days |
| Cylindrical cartridge (Ø 25–100 mm, L 50–500 mm) | 100 pcs | $12.00–$25.00 | $8.00–$16.00 | $5.50–$11.00 | $300–$600 | 10–15 days |
| Conical filter (Ø 30–150 mm, cone angle 30°–120°) | 200 pcs | $15.00–$30.00 | $10.00–$20.00 | $7.00–$14.00 | $400–$800 | 12–18 days |
| Rectangular panel (max 2,000 × 1,000 mm) | 50 pcs | $35.00–$80.00 / sqm | $25.00–$55.00 / sqm | $18.00–$40.00 / sqm | $500–$1,200 | 12–18 days |
| Pleated cartridge (Ø 25–75 mm, L 100–1,000 mm) | 500 pcs | $25.00–$50.00 | $18.00–$35.00 | $12.00–$24.00 | $800–$1,500 | 15–20 days |
| Perforated metal hybrid (custom hole pattern) | 100 pcs | $45.00–$90.00 / sqm | $32.00–$65.00 / sqm | $22.00–$45.00 / sqm | $600–$1,000 | 15–20 days |
| Mesh roll (custom width 0.5–2.0 m, standard 30 m) | 5 rolls | $8.50–$15.00 / sqm | $7.00–$12.00 / sqm | $5.50–$9.50 / sqm | None | 7–12 days |
Price factors: 304 grade = base price. 316 grade = +20–30%. 316L grade = +25–35%. Electro-polishing = +15–20%. Edge wrapping (spot-welded rim) = +$0.30–$0.80 per disc.
Tooling note: Tooling costs for dies, jigs, and fixtures are one-time charges. They are fully waived on orders over $5,000. On repeat orders, you pay zero tooling.
Sample policy: One-off prototype (1–5 pcs) can be produced at 2.5× the 100-pc unit price. This covers setup time and material waste. Prototypes ship in 3–5 days.
Custom Product Forms in Full Production
Our filter mesh factory in Hebei produces the full range of formed mesh products. Below are the most requested shapes and their typical industrial roles.
| Product Form | Common Sizes | Typical Applications |
|---|---|---|
| Filter Discs | 10 mm – 500 mm diameter | Inline strainers, pump protection, extruder screens |
| Cylindrical Cartridges | 25 mm – 300 mm diameter, 50 mm – 1,500 mm length | Hydraulic oil, fuel filtration, gas coalescing |
| Conical Filters | 30° – 120° cone angle | Suction lines, reservoir breathers, melt filtration |
| Flat Panels | Up to 2,000 × 1,000 mm | Vibratory separators, architectural screens, fluidized beds |
| Mesh Rolls | 0.5 m – 2 m width, 30 m length standard | Raw material for downstream stamping or cutting |
| Perforated-Sheet Hybrids | Custom | Support layers for sintered laminates, heavy-duty shaker screens |
For deeper detail on cylinder design and sizing, see our dedicated post on stainless steel filter cylinders and cartridges.
Materials & Specifications
We stock and weave in the three principal stainless steel grades used for filtration. Each is drawn from certified mill coils and inspected for chemical composition before entering production.
304 Stainless Steel Mesh
The workhorse grade. Good corrosion resistance in water, mild chemicals and ambient temperatures up to approximately 400 °C. Suitable for general industrial filtration, food processing and architectural applications. Lower cost than 316 variants, making it the default for bulk stainless steel mesh orders where the environment is not aggressively corrosive.
316 Stainless Steel Mesh
Adds 2–3 % molybdenum for superior pitting and crevice corrosion resistance, especially in chloride-rich media such as seawater, brine and certain chemical process streams. Operating temperature limit extends to roughly 450 °C in continuous service. Often specified for marine, pharmaceutical and chemical plant duty.
316L Stainless Steel Mesh
The low-carbon variant of 316. The reduced carbon content (≤ 0.03 %) minimizes sensitization and intergranular corrosion risk during welding. This makes 316L the standard choice for welded cylinders and cartridge assemblies that must pass hydrostatic testing and long-term service without grain-boundary degradation.
Need help deciding? Our 7-factor guide to choosing stainless steel mesh covers alloy selection, mesh count, open area and wire diameter in detail.
Industries We Serve
As an industrial filter mesh supplier in China, we ship to a wide cross-section of sectors. The following are the most active.
Water & Wastewater Treatment
Municipal plants and industrial effluent systems use our woven discs and cylinders for sand removal, activated-carbon bed support and membrane pre-filtration. 316L is preferred for saline or chlorinated water.
Oil & Gas / Hydraulics
Downstream refineries and mobile hydraulic fleets rely on multi-layer sintered discs and pleated cylinders for particulate control. Our hydraulic oil filter mesh guide explains pressure ratings and collapse-strength calculations for these applications.
Pharmaceutical & Biotechnology
FDA-grade 316L mesh with surface finishes meeting Ra ≤ 0.8 µm is used in sterile filtration skids, tablet dedusters and bioreactor vent filters. We can supply material certificates, mill test reports and traceability documentation. For compliance specifics, refer to our food and beverage FDA guide.
Food & Beverage
Brewery wort filters, edible oil decanters and sugar-juice clarification screens use 304 or 316L mesh in disc and panel form. Surface finish and cleanability are critical; electropolishing is available on request.
Bulk Order & Factory Direct Pricing
Because we are a stainless steel mesh factory with in-house weaving, welding and forming, we can offer factory direct pricing without distributor markups. Volume thresholds for bulk stainless steel mesh orders typically start at:
- Woven rolls: 500 m² per specification
- Filter discs: 1,000 pieces per diameter
- Cylinders: 200 pieces per size
- Panels: 100 pieces per dimension
Above these thresholds, tooling costs are amortized and material procurement moves to mill-direct coil orders, which reduces unit price significantly. For smaller quantities, we still accept custom orders; the price simply reflects the shorter production run.
If you are looking for current pricing benchmarks, our 2026 stainless steel mesh price guide provides per-kg and per-square-meter reference ranges based on alloy, mesh count and order volume.
Quality Control & Certifications
Every custom order passes through our QC protocol before release:
- Raw-material verification: Mill test report (MTR) review and spot spectroscopy
- Weave inspection: Mesh count, wire diameter and open area measured per ASTM E11
- Dimensional check: CMM or go/no-go gauges for formed parts
- Welding audit: X-ray or dye-penetrant inspection on welded cylinders
- Cleanliness: Ultrasonic cleaning and particle-count testing for pharmaceutical lots
- Final pack: Vacuum-sealed bags with desiccant for ocean freight
We maintain ISO 9001 quality management and can provide FDA-compliant material statements on request. Third-party SGS or BV inspection is welcome at the factory.
How to Place a Custom Order
The process is straightforward for both OEM and ODM projects:
- Send your requirements: Drawing, sample, or a written specification (fluid, temperature, pressure, flow, particle size target).
- Receive a technical proposal: We return a recommended weave pattern, alloy, forming method and dimensional tolerance within 48 hours.
- Approve the quotation: Pricing is valid for 30 days and includes tooling, samples and production.
- Prototype evaluation: Typical lead time for first samples is 7–10 working days.
- Production and delivery: Standard production lead time is 3–4 weeks after sample approval. Express air freight or consolidated sea freight options are available.
Frequently Asked Questions
What is the minimum order quantity for custom stainless steel mesh?
We do not enforce a strict MOQ, but practical minimums are around 50 m² for woven rolls or 100 pieces for small formed parts. For bulk stainless steel mesh pricing, thresholds of 500 m² or 1,000 pieces unlock the best unit rates.
Can you manufacture to our exact drawing and tolerances?
Yes. Our OEM stainless steel mesh service is built around customer-supplied drawings in DXF, DWG, STEP or PDF. Typical tolerances are ±0.1 mm on wire diameter and ±0.5 mm on formed part dimensions, with tighter tolerances available on request.
Do you offer ODM design support if we only have an application description?
Absolutely. Our ODM stainless steel mesh team includes filtration engineers who can select the appropriate mesh count, alloy and forming method from your process parameters alone. We then produce prototypes for validation before committing to volume.
What alloys do you stock for custom orders?
We routinely weave and form 304, 316 and 316L stainless steel. Duplex 2205 and 904L super-austenitic grades are available on request for highly corrosive environments. Nickel alloys (Monel, Inconel) can be sourced for specialized orders.
How long does a custom order take from inquiry to delivery?
First samples: 7–10 working days. Production after sample approval: 3–4 weeks. Shipping to Europe or North America adds 3–5 days (air) or 25–35 days (sea). Repeat orders with approved tooling typically ship in 2–3 weeks.
Do you provide material certificates and traceability documentation?
Yes. Mill test reports, chemical composition certificates, dimensional inspection reports and ISO 9001 compliance statements are included as standard. FDA material statements, SGS inspection reports and third-party test certificates are available on request.
Is there a cost advantage to ordering from a filter mesh factory in China?
As a stainless steel mesh manufacturer operating our own looms and welding stations, we eliminate the distributor and trading-company margins. For equivalent quality, our factory-direct pricing is typically 25–40 % below Western distributor quotes, with shorter lead times on custom work because the design-to-production loop is internal.
Can you handle long-term supply agreements and scheduled releases?
Yes. We maintain rolling forecasts with several OEM customers and hold consignment stock at our factory for scheduled monthly releases. This reduces your inventory carrying cost while ensuring supply continuity.
Ready to Discuss Your Custom Stainless Steel Mesh Project?
If you need a custom mesh filter manufacturer or wire mesh OEM manufacturer that can move from prototype to production in weeks, not months, send us your requirements. We will return a technical proposal and quotation within 48 hours.
Contact us today for OEM, ODM or bulk orders — and receive factory-direct pricing from one of Anping’s established stainless steel mesh producers.
